WDT-AD Double Side Synchronous Automatic Laminating Production Line
* Note: If user has special need, we could design according to
user’s need.
Automatic operation, high efficiency, easy operation, reliable
performance, particularly suitable for production of large size
boards and large output occasion. This line need only 1-2 workers.
Our designer has worked in this industry for more than 30 years, he
is experienced,famous and leading in woodworking machine. Our
supplier is the famous ones in their industry, this guarantees the
high quality of our machine. Following are some suppliers of key
parts.
We are the first Chinese factory who successfully produced double
side synchronous production line.
- Short Preparing Time: about 15s
High production capacity: 120-150Sheets/h(Calculated Based on: Pressure Holding Time is
15s, The Thickness of Raw Board is 16mm/18mm)
1)The Thermal Oil Temperature of Hot Press is Controlled
Automatically
If The Oil Temperature is 30℃-40℃,The Control System Will Turn Off
The Chiller Automatically; If The Oil Temperature is Over 40℃,The
Control System Will Turn on The Chiller Automatically.
2)Most of Device are Used International Brand. The Whole Line Runs
Automatically Except Laying Paper and Changing Caul Plate.Taking
and Stacking the Protect Board are Also Automatic. The Operation is
Convenient and Easy.
3)Each Operation Cabinet can Supply Full-automatic, Semi-automatic
and Manual Control. It is Equipped With Uninterruptible Power
Supply, So It Could Guarantee the PLC,HMI and All Magnetic Valve of
Hydraulic System in Normal Working When the Equipment is Power
Failure Suddenly and Avoid the Damage for Equipment.
4)The frame of press is manufactured from a whole high quality
plain steel plate and stress analysis and computation in detail to
ensure the enough stiffness and safety factor. The whole working
surface of the frame is processed by machine tool; the frame has
high accuracy, which ensures the quality of the finished board.
5) Loading and unloading machine are composed of loading with clamp
and unloading with vacuum cups. They are driven by servo motor to
ensure the accuracy is high and work steadily.
6) Stacking Carrier Use Servo Motor Driving to Ensure Stacking
Neatly.
7) The Cylinder Sealing is Used of Combination Seal. The Sealing is
Reliable and Extends the Using Life. The Normal Using Life is 3-5
Years, Many Customers Use More Than 5 Years.
8) Trimming Machine Works Stable.
1. Raw board: particle boards, MDF boards and HDF boards Product:
furniture board,laminate flooring.
2. Overlaying materials: melamine paper, Al2O3 abrasion resistant paper
3. Standard sizes: 4’×10’, 4’×16’, 6’×8’, 6’×9’, 6’×12’,
6’×16’,7’×9’, 7’×10’, 7’×18’, 6’×16’.
4. Its loader is equipped with compressed air clamp to load board.
5. Features: Double side synchronous, automatic loading and
unloading, automatic trimming, high efficiency, easy for worker to
operate, reliable equipment, particularly suitable for production
of large size boards and large output occasion.
Layout Drawing of WDT-AD Basic Short Cycle Laminating Press
Main Device List of Producer
| NO. | Name | Manufacturer |
| 1 | PLC | SIEMEMS(S7) |
| 2 | human-machine interface | SIEMEMS |
| 3 | Contactor | Schneider |
| 4 | air switch | Schneider |
| 5 | photoelectric switch | sick |
| 6 | limit switch | Sick/Schneider |
| 7 | servo motor | SEW/Lenz |
| 8 | Vacuum generator | FESTO |
| 9 | Hydraulic proportional valve | Rexroth |
| 10 | Main hydraulic valve | Rexroth |
| 11 | Hydraulic pump | Rexroth |
| 12 | Motor of hydraulic pump | ABB/Siemens |
| 13 | Inverter | MITSUBISHI |
| 14 | Reducer | SEW |
| 15 | Air cylinder | Airtac |
| 16 | Pneumatic valve | Festo |
| 17 | Accumulator | HYDAC |
| 18 | Normal bearing | SKF |
| 19 | Bearing with base | China brand |
Product exhibition
